Workshop Steel Bridge Crane

     The manual single beam crane produced by CTECH Machinery SDN BHD mainly consists of a single main beam, a large vehicle operating mechanism, a manual trolley, and a chain hoist. Its operation and lifting rely on manual pulling of the chain drive, without the need for electricity. The control methods can be divided into ground control and control room control, and the working environment should avoid flammable, explosive, and corrosive gases.

     The manual single beam overhead crane produced by CTECH Machinery SDN BHD relies on manual drive and is suitable for situations with no power, low frequency of use, or limited budget.
     The SL type manual single beam bridge crane adopts a single beam structure and chain transmission, consisting of a trolley running mechanism, a main beam, a manual trolley, and a manual lifting mechanism. Its running track is installed above the longitudinal track.  
     This model belongs to the category of light and small models, suitable for factory equipment installation, maintenance, and workplaces without power supply. [4] Its lifting capacity is usually 1-10 tons, lifting height is 3-10 meters, and the working system is A1-A3.
     The SLX manual single beam suspension bridge crane is suspended on the roof structure or under the beam, running along the I-beam track. Its main components include the bridge frame, the trolley running mechanism, and the manual single rail trolley.
     The entire crane crosses the lower edge of the I-beam track and is driven by a manual chain hoist for lifting and operation, making it suitable for applications with limited floor space and inability to lay tracks. Its lifting capacity is usually 0.5-3 tons, with a span of 3-12 meters and a lifting height of 2.5-12 meters.